Thread: MG Tab layup
View Single Post
  #2  
Old 05-31-2007, 12:43 PM
John Slade's Avatar
John Slade John Slade is offline
Flying TurboRotaryCozyIV
 
Join Date: Apr 2004
Location: KWST
Posts: 3,836
Default Re: MG Tab layup

My guess is the (good) technique you're using with low viscosity MGS and squeege through plastic is saving excess epoxy which would otherwise make up the thickness. In this case the thickness is important. I'd add extra plies to get the plans thickness. Your tab will just be a little stronger.
Reply With Quote