Canard Community Forum  

Go Back   Canard Community Forum > Talk All About Canard Aviation > PreBuild Planning and ACTIONS > Plane Day
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 08-25-2007, 11:31 AM
David Clifford's Avatar
David Clifford David Clifford is offline
Member
 
Join Date: Apr 2004
Location: Howell, Michigan 48843
Posts: 587
Default Automotive Electrical Connectors

Friday was our Plane Day this week. We got some major electrical behind us,,,however when we powered up the board and tried to retract the Jack Wihelmson nose lift,,,,,NOTHING!! What has been working fine for us for years since initial installation was now doing anything! After about two hours of tracing and testing,,,,Thane located the problem(s). The first was the electrical connection Jack made on the assembly. The crimp on the blue auto splice connector he used was ever so loose and power was not going thru unless you wiggled it. The second problem was the second auto splice connector which was doing the very same thing!! Both were replaced with a soldered splice and shrink wrapped. I know the subject was recently discussed,,,so a lesson was learned first hand is to keep away from them. Overall, it was a very productive day with many loose ends cleaned up!
Attached Thumbnails
Click image for larger version

Name:	DSC00790.JPG
Views:	62
Size:	159.4 KB
ID:	4058  
__________________
Dave Clifford

Last edited by David Clifford : 08-25-2007 at 11:33 AM. Reason: bad spelling!
Reply With Quote
  #2  
Old 08-25-2007, 06:52 PM
mplafleur's Avatar
mplafleur mplafleur is offline
Finally at Chapter 4!
 
Join Date: Apr 2004
Location: Lathrup Village, MI (Metro Detroit)
Posts: 1,203
Default Re: Automotive Electrical Connectors

Those butt splices are an accident waiting to happen.

I'd advise STRONGLY for everyone to not use those.

Not only is there no stress relief, but I've never seen anyone use the correct tool to get a gas tight crimp.
__________________
Michael LaFleur
Turbo Rotary Big EZ Retract
And no trees were harmed or killed in the creating and sending of this message. However, a large number of electrons were terribly inconvenienced...
http://banners.wunderground.com/weat...ions/76225.gif
http://banners.wunderground.com/weat...ions/76225.gif
Reply With Quote
  #3  
Old 08-27-2007, 01:04 PM
dpaton's Avatar
dpaton dpaton is offline
Future Cozy Driver
 
Join Date: Oct 2005
Location: Streamwood, Iiilnois
Posts: 259
Default Re: Automotive Electrical Connectors

Oh gawd those butt splices look awful. I have the right crimper for them, and use it, but man, doing it without the $150 tool is asking for disaster. Literally.

Solder and heatshrink and real live connectors and proper crimp tools are your friends (but not all at the same time). Anything else is a mistake.
__________________
This is not a sig. This is a duck. Quack.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 10:23 AM.


Powered by vBulletin® Version 3.6.7
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.